LV-7575 BASIC SERIAL COMMAND FUNCTIONAL SPECIFICATIONS

LV-7575 Basic Serial Command Functional Specifications
15/26
6.27 INPUT 2 RGB Command
Command “C25” [CR]
Detail Select RGB input in Input 2
Acceptable [ACK] [CR]
Response
Unacceptable “?” [CR]
6.28 IMAGE Command
Command “C27” [CR]
Detail
Switch Image Setting status
This command works the same way as “IMAGE” button on the projector or remote
control.
Acceptable [ACK] [CR]
Response
Unacceptable “?” [CR]
6.29 ON START SET Command
Command “C28” [CR]
Detail
Enable Power ON Start
This status is stored in EEPROM and retained regardless of Power OFF/ON
operation.
Acceptable [ACK] [CR]
Response
Unacceptable “?” [CR]
6.30 ON START CANCEL Command
Command “C29” [CR]
Detail
Disable Power ON Start
This status is stored in EEPROM and retained regardless of Power OFF/ON
operation.
Acceptable [ACK] [CR]
Response
Unacceptable “?” [CR]
6.31 POWER MANAGEMENT READY Command
Command “C2A” [CR]
Detail
Set Power Management function to ready status
This status is stored in EEPROM and retained regardless of Power OFF/ON
operation.
Acceptable [ACK] [CR]
Response
Unacceptable “?” [CR]
6.32 POWER MANAGEMENT CANCEL Command
Command “C2B” [CR]
Detail
Set Power Management function to off status
This status is stored in EEPROM and retained regardless of Power OFF/ON
operation.
Acceptable [ACK] [CR]
Response
Unacceptable “?” [CR]