LV-7565Command

Expand Serial Command Specification Page 34 of 46
9.4.10. CR_COLTEMP Command
Command “CR_COLTEMP” [CR]
Details Read Color Temp setting status
Acceptable “000_%1” [CR]
%1
“000” ~ “003”
“BLANK” ----- OSD menu is blank
(Not XLow / Low / Mid / High)
Response
Unacceptable “?” [CR]
9.4.11. CR_NZRED Command
Command “CR_NZRED” [CR]
Details Read Noise Reduction setting status
Acceptable “000_%1” [CR]
%1
“ON” -------Noise Reduction setting
“OFF” ------Noise Reduction cancllation
Response
Unacceptable “?” [CR]
9.4.12. CR_PROGV Command
Command “CR_PROGV” [CR]
Details Read Progressive setting status
Acceptable “000_%1” [CR]
%1
“L1”-----Progressive Mode L1 setting
“L2”-----Progressive Mode L2settiing
“OFF”---Progressive cancellation
Response
Unacceptable “?” [CR]
9.4.13. CR_IMAGE Command
Command “CR_IMAGE” [CR]
Details Read Image setting status
Acceptable “000_%1” [CR]
%1
“STAND” ---------Standard
“REAL” ------------High contrast
“CINEMA” -------Cinema
“CUSTOM1” -----Custom
Response
Unacceptable
“Error Code” [CR] --- Invalid
“?” [CR] ----------------- When receives unclear Command
9.4.14. CR_IMGGMD Command
Command “CR_IMGGMD” [CR]
Details Read Standard / High contrast / Cinema for Image Gamma setting.
Acceptable “000_%1” [CR]
%1
“STD” --------- Standard
“REL” --------- High contrast
“CNM” -------- Cinema
Response
Unacceptable “?” [CR]