LV-7565Command

Expand Serial Command Specification Page 31 of 46
8.10.12. CF_KEYDIS Command
Command “CF_KEYDIS_%1” [CR]
%1
“NONE” ---------- RC and KEY are available
“RC” --------------- Bar the use of RC
“KEY” ------------- Bar the use of KEY
Details
Set bar the use of RC / KEY. (Only valid when it is in the usual Power On
state)
Acceptable “000” [CR]
Response
Unacceptable “Error Code” [CR]
8.10.13. CF_FDEFAULT Command
Command “CF_FDEFAULT_%1” [CR]
%1 “RST”
Details Set Factory Default. (Only valid when it is in the usual Power On state)
Acceptable “000” [CR]
Response
Unacceptable “Error Code” [CR]