Expanded_Serial_Command_Codes

Expand Serial Command Functional Specification Page 8 of 41
5.6. Lamp Command Table
Execute command Item
CF_LAMPH_%1 [CR] Reset Lamp total running time
CF_LAMPMODE_%1 [CR] Select Lamp mode
5.7. Sound Command Table
Execute command Item
CF_VOLUME_%1 [CR] Set Volume value
CF_MUTE_%1 [CR] Control Sound Mute On / Off
5.8. Setting Command Table
Execute command Item
CF_BBACK_%1 [CR] Set Blue Back function
CF_DISP_%1 [CR] Set Display function
CF_LOGO_%1 [CR] Set Logo function
CF_CEIL_%1 [CR] Set Ceiling function
CF_REAR_%1 [CR] Set Rear Function
CF_RCODE_%1 [CR] Select Remote Control Reception Code
CF_LANG_%1 [CR] Select OSD language
CF_ON-STA_%1 [CR] Set Power On Start Function
CF_P-MANE_%1 [CR] Set Power Management function
CF_P-MANETIME_%1 [CR] Set Power Management time
CF_FANSPEED_%1 [CR] Select Fan Speed
CF_KEYDIS_%1 [CR] RC / KEY inhibit
CF_TERMINAL_%1 [CR] Set Terminal
CF_STANDBYMODE_%1 [CR] Set Standby mode
CF_POINTER_%1_%2[CR] Set Pointer
CF_FDEFAULT_%1[CR] Set Factory Default
CF_AUTOSETUP_%1_%2[CR] Set Auto Setup
CF_LOGOCAPTURE_%1[CR] Capture the current image on the screen
CF_FANMODE_%1[CR] Select Fan mode