Expanded_Serial_Command_Codes

Expand Serial Command Functional Specification Page 36 of 41
9.9. Lamp Status Read Command
9.9.1. CR_LAMPREPL Command
Command
“ＣR＿ＬＡＭＰＲＥＰＬ”[CR]
Details Get Lamp replacement time information
Acceptable “000_%a” [CR]
%a
“1Y” ------- Over the Lamp replacement time
“1N” ------- Have not reached the lamp replacement time
Response
Unacceptable “?” [CR]
9.9.2. CR_LAMPMODE Command
Command “CR_LAMPMODE” [CR]
Details Get Lamp mode
Acceptable “000_%a” [CR]
%a
“NORMAL” --------- Lamp mode is Normal
“ECO” ----------------- Lamp mode is Silent
“AUTO” -------------- Lamp mode is Auto
Response
Unacceptable “?” [CR]
9.9.3. CR_PROJH Command
Command “CR_PROJH” [CR]
Details Get total Projector running time. (hours)
Acceptable “000_%a” [CR]
%a “0000000” – “9999999”
Response
Unacceptable “?” [CR]
9.10. Sound Status Read Command
9.10.1. CR_VOLUME Command
Command CR_VOLUME” [CR]
Details Get User control Volume value
Acceptable “000_%a” [CR]
%a “000” – “063”
Response
Unacceptable “?” [CR]
9.10.2. CR_MUTE Command
Command “CR_MUTE” [CR]
Details Get Sound Mute setting
Acceptable “000_%a” [CR]
%a
“ON” --------- Sound Mute On
“OFF” ------- Sound Mute Off
Response
Unacceptable “?” [CR]