Expanded_Serial_Command_Codes

Expand Serial Command Functional Specification Page 35 of 41
9.8. Screen Status Read Command
9.8.1. CR_SCREEN Command
Command “CR_SCREEN” [CR]
Details Get selected Screen Size
Acceptable “000_%a” [CR]
Input is
PC
“NORMAL” -------- Normal (4:3) is selected
“WIDE” -------------- Wide (16:9) is selected
%a
Input is
Video
“NORMAL” -------- Normal (4:3) is selected
“WIDE” -------------- Wide (16:9) is selected
Response
Unacceptable
“Error Code” [CR] ------- Invalid
“?” [CR] --------------------- Command
9.8.2. CR_FLSCREN Command
Command “CR_FLSCREN” [CR]
Details Get the screen size status that Full Screen is selected or not.
Acceptable “000_%a” [CR]
%a
“ON” --------- Full Screen is set
“OFF” -------- Full Screen is not set
Response
Unacceptable
“Error Code” [CR] ------- Invalid
“?” [CR] --------------------- Command
9.8.3. CR_TRUE Command
Command “CR_TRUE” [CR]
Details Get information if the screen setting is True or not.
Acceptable “000_%a” [CR]
%a
“ON” --------- True mode is set
“OFF” -------- True mode is not set
Response
Unacceptable
“Error Code” [CR] ------- Invalid
“?” [CR] --------------------- Command
9.8.4. CR_KYSTNMODE Command
Command “CR_KYSTNMODE” [CR]
Details Get Keystone Store Mode setting status.
Acceptable “000_%a” [CR]
%a
“STR” ------ “Store Mode” is Store
“RST” ------ “Store Mode” is Reset
Response
Unacceptable “?” [CR] --------------------- Command