Expanded_Serial_Command_Codes

Expand Serial Command Functional Specification Page 30 of 41
9.4.10. CR_COLTEMP Command
Command “CR_COLTEMP” [CR]
Details Get Color Temp setting status
Acceptable “000_%a” [CR]
%a
“000” ---------- XLow
“001” ---------- Low
“002” ---------- Mid
“003” ---------- High
“ADJ” --------- Processing White Balance adjustment
Response
Unacceptable “?” [CR]
9.4.11. CR_PROGV Command
Command “CR_PROGV” [CR]
Details Get Progressive setting status
Acceptable “000_%a” [CR]
%a
“L1” ---------- Progressive mode L1
“L2” ---------- Progressive mode L2
“OFF” -------- Progressive mode Off
Response
Unacceptable “?” [CR]
9.4.12. CR_FILM Command
Command “CR_FILM” [CR]
Details Get Film mode setting status
Acceptable “000_%a” [CR]
%a
“ON” ---------- Film mode On
“OFF” -------- Film mode Off
Response
Unacceptable “?” [CR]
9.4.13. CR_IMAGE Command
Command “CR_IMAGE” [CR]
Details
Get Image mode setting status.
Required data “CUSTOM1” is the same as “Custom” on OSD Menu.
Acceptable “000_%a” [CR]
%a
“STAND” ------------------ Standard
“REAL” -------------------- High contrast
“CINEMA” --------------- Cinema
“BLACKBOARD” ------- Blackboard
“CUSTOM1” ------------- Custom
Response
Unacceptable
“Error code” [CR] ---- Invalid
“?” [CR] ------------ When the projector received unclear command
9.4.14. CR_IMGGMD Command
Command “CR_IMGGMD” [CR]
Details Get Standard / High contrast / Cinema for Image-Gamma setting.
Acceptable “000_%a” [CR]
%a
“STD” -------- Standard
“REL” -------- High contrast
“CNM” ------- Cinema
“BKB” -------- Blackboard
Response
Unacceptable “?” [CR]