Expanded_Serial_Command_Codes

Expand Serial Command Functional Specification Page 28 of 41
9. Status Read Command
9.1. Format
1) PC issues Commands as below
“CR_COMMAND” [CR]
COMMAND: Character Line
2) When Projector receives the appropriate Command, it returns a character line as the required
data.
“000_%1” [CR]
%1: Required Data (character line)
3) When receiving data cannot be decode, the Projector returns “?” [CR]
9.2. Transfer Example
Get Total Dots of Projector by expand Commands
PC → Projector: “CR_TDOTS” [CR]
PC ← Projector: “000_1344” [CR]
9.3. Operation Requirement
Should be always operated
9.4. Image Status Read Command
9.4.1. CR_BRIGHT Command
Command “CR_BRIGHT” [CR]
Details Get Brightness value of user control
Acceptable “000_%a” [CR]
%a “000” – “063”
Response
Unacceptable “?” [CR]
9.4.2. CR_CONT Command
Command “CR_CONT” [CR]
Details Get Contrast value of user control
Acceptable “000_%a” [CR]
%a “000” – “063”
Response
Unacceptable “?” [CR]
9.4.3. CR_COLOR Command
Command “CR_COLOR” [CR]
Details Get Color value of user control
Acceptable “000_%a” [CR]
%a “000” – “063”
Response
Unacceptable “?” [CR]