Expanded_Serial_Command_Codes

Expand Serial Command Functional Specification Page 24 of 41
8.11.5. CF_REAR Command
Command “CF_REAR_%1” [CR]
%1
“ON” ---------- Select Rear
“OFF” --------- Cancel Rear
Details
Set / Cancel Rear. (Only valid when it is in the usual Power On status)
When Rear is On, it will be a mirror-reversed image. This setting status is
stored in EEPROM, hold even if AC Power turning Off and On.
Acceptable “000” [CR]
Response
Unacceptable “Error Code” [CR]
8.11.6. CF_RCODE Command
Command “CF_RCODE_%1” [CR]
%1
“001” ---------- Select Code1
“002” ---------- Select Code2
“003” ---------- Select Code3
“004” ---------- Select Code4
“005” ---------- Select Code5
“006” ---------- Select Code6
“007” ---------- Select Code7
“008” ---------- Select Code8
Details
Select Remote Control Code. (Only valid when it is in the usual Power On status)
This setting status is stored in EEPROM, hold even if AC Power turning Off and
On.
Acceptable “000” [CR]
Response
Unacceptable “Error Code” [CR]
8.11.7. CF_LANG Command
Command “CF_LANG_%1” [CR]
%1
“ENG” ---------- Select English
“DEU” ---------- Select German
“FRA” ---------- Select French
“ITA” ------------ Select Italy
“ESP” ----------- Select Spanish
“POR” ---------- Select Portuguese
“NED” ---------- Select Dutch
“SVE” ---------- Select Swedish
“RUS” ---------- Select Russian
“CHI” ----------- Select Chinese
“KOR” ---------- Select Korean
“JPN” ---------- Select Japanese
Details
Set OSD Language. (Only valid when it is in the usual Power On status)
This setting status is stored in EEPROM, hold even if AC Power turning Off and
On.
Acceptable “000” [CR]
Response
Unacceptable “Error Code” [CR]
8.11.8. CF_ON-STA Command
Command “”CF_ON-STA_%1” [CR]
%1
“ON” -------- Select Power On Start
“OFF” ------- Cancel Power On Start
Details
Set / Cancel Power ON Start. (Only valid when it is in the usual Power On
status) This setting status is stored in EEPROM, hold even if AC Power
turning Off and On.
Acceptable “000” [CR]
Response
Unacceptable “Error Code” [CR]