Expanded_Serial_Command_Codes

Expand Serial Command Functional Specification Page 9 of 41
6. Status Read Command Table
6.1. Image Status Read Command Table
Status read command Item
CR_BRIGHT [CR] Read Brightness setting value
CR_CONT [CR] Read Contrast setting value
CR_COLOR [CR] Read Color setting value
CR_TINT [CR] Read Tint setting value
CR_SHARP [CR] Read Sharpness setting value
CR_GAMMA [CR] Read Gamma setting value
CR_WBAL-R [CR] Read White Balance Red value
CR_WBAL-G [CR] Read White Balance Green value
CR_WBAL-B [CR] Read White Balance Blue value
CR_COLTEMP [CR] Read Color temperature setting
CR_PROGV [CR] Read Progressive setting
CR_FILM [CR] Read Film mode setting
CR_IMAGE [CR] Read Image mode setting
CR_IMGGMD [CR] Read Image-Gamma setting value
6.2. PC Status Read Command Table
Status read command Item
CR_FSYNC [CR] Read Fine Sync setting value
CR_TDOTS [CR] Read Total Dots setting value
CR_CLAMP [CR] Read Clamp setting value
CR_H-POS [CR] Read Horizontal Position setting value
CR_V-POS [CR] Read Vertical Position setting value
CR_DDOTS [CR] Read Display Dots setting value
CR_DLINE [CR] Read Display Line setting value
CR_PCSTORE [CR] Read Free or Store is selected for PC Adj.; Mode1-5
CR_SETPCADJ [CR] Read Current PC signal for PC display status
6.3. Video Status Read Command Table
Status read command Item
CR_SERSYS [CR]
Read selected current signal. When in Auto mode, it returns
a result by Auto detect.
6.4. Input Status Read Command Table
Status read command Item
CR_INPUT [CR] Read selected Input
CR_SOURCE [CR] Read selected Input Source
CR_INPUT_%1 [CR] Read Input and the Source
CR_SYSTEM [CR] Read selected system status in Input mode
6.5. Screen Status Read Command Table
Status read command Item
CR_SCREEN [CR] Read selected screen size
CR_FLSCREN [CR] Read Full screen mode
CR_TRUE [CR] Read True mode setting
CR_KYSTNMODE [CR] Read Keystone Store mode setting
6.6. Lamp Status Read Command Table
Status read command Item
CR_LAMPREPL [CR] Read information for Lamp replacement time
CR_LAMPMODE [CR] Read Lamp mode status
CR_PROJH [CR] Read Projector total running time
6.7. Sound Status Read Command Table
Status read command Item
CR_VOLUME [CR] Read Volume Value
CR_MUTE [CR] Read Sound Mute setting