LR1 USER MANUAL Canon
Copyright This manual is copyrighted by Canon Computer Systems, Inc. (CCSI) with all rights reserved. Under the copyright laws, this manual may not be reproduced in any form, in whole or part, without the prior written consent of CCSI. © 1999 Canon Computer Systems, Inc. Disclaimer Canon Computer Systems, Inc. has reviewed this manual thoroughly in order that it will be an easy to use guide to your Canon LR1 Color Bubble Jet Printer.
Using Your Documentation The following documentation is supplied with the Canon LR1 Color Bubble Jet™ Printer to help you efficiently use your new printer. Quick Start Guide Follow the instructions in Quick Start Guide to set up the printer and prepare it for use. Quick Guide to Printing This guide (on the back of Quick Start Guide) provides explanations about everyday operations, such as remedies for low print quality, replacing ink tanks, what to do if the lights come on, and loading paper.
Conventions This User’s Manual uses the following conventions to alert you to information that will help you operate the printer correctly and safely. Notes provide advice or suggestions regarding the use of the printer. Cautions alert you to operations that could cause damage to your hardware or software, or cause injury to yourself.
Contents 1 Introduction .....................................................................................................1-1 Important Notes on Safety ................................................................................1-2 Choosing a Place for Your Printer ..............................................................1-2 Supplying Power to the Printer ..................................................................1-3 Handling the Printer ...................................................
5 Troubleshooting ..............................................................................................5-1 Power ...................................................................................................................5-1 Lights ..................................................................................................................5-1 Paper Trouble When Printing ...........................................................................5-3 Paper Trouble After Printing ..........
Introduction Introduction Congratulations on your purchase of the Canon LR1 Color Bubble Jet Printer. We appreciate your choosing this printer to meet your printing needs. The Canon LR1 printer offers excellent print quality and fast print speed using both color and black inks. We are certain you will be satisfied with this advanced Bubble Jet technology.
Important Notes on Safety Choosing a Place for Your Printer ■ Do not place the printer near volatile liquids, such as alcohol or paint thinner. Volatile liquids coming in contact with the electrical components inside the printer may result in fire or electrical shock. ■ Do not place the printer on an unstable or vibrating surface. If the printer falls or tips over, it may be damaged or cause injury.
■ To avoid electrical shock, make sure your hands are dry before plugging in the power cord. ■ Make sure you insert the plug all the way into the power outlet. Loose connections can result in fire or electrical shock. ■ Attempting to use a power cord or AC adapter other than those provided can result in fire or electrical shock. Do not use the printer’s power cord and AC adapter with any other machine. ■ Avoid damaging, modifying, pulling, or excessively bending the AC adapter and power cord.
■ Do not use the power cord if it is tied or knotted. Doing so may result in fire or electrical shock. ■ If you notice smoke or any strange odor coming from your printer, immediately turn off the power and unplug the power cord from the power outlet. Continuing to use the printer under these conditions may cause fire or electrical shock. Contact the Canon Customer Care Center. ■ When removing the power cord, make sure you pull on the plug, and not on the cord.
■ Do not use items such as flammable sprays near the printer. If gas from the spray contacts electrical components inside the printer, fire or electrical shock may result. ■ Do not disassemble or alter the printer in any way. The printer includes high voltage components that can cause fire or electrical shock. ■ When moving the printer, be sure to hold it so that the front side is angled up away from the floor. Otherwise, the paper output tray may fall out of the printer and be damaged.
Maintaining the Printer ■ When cleaning, use a damp cloth. Do not use volatile liquids such as alcohol, benzene, or paint thinner. Such substances can cause fire or electrical shock if they contact electrical components inside the printer. ■ Before cleaning the printer, turn off the power and unplug the power cord from the electrical outlet. If you leave the printer plugged in and accidentally turn the power on, the parts inside the printer will start to move and you could be injured.
Supplies and Accessories If supplies are not available from your local dealer, you can order directly from Canon by calling 1-800-671-1090. Canon has more engineers dedicated to creating quality ink for providing the best results for output on Bubble Jet printers than any other organization. Canon does not prohibit the use of third-party inks and the use of third-party inks does not invalidate the product’s limited warranty.
■ Ink Tanks BC-11e Color BJ Cartridge Number of items in package Type Product name Black ink BCI-11 Black Ink Tank BCI-18 Black Ink Tank (High capacity) 3 2 Color ink BCI-11 Color Ink Tank BCI-18 Color Ink Tank (High capacity) 3 1 BC-10 Black BJ Cartridge Type Product name Black ink BCI-10 Black Ink Tank BCI-17 Black Ink Tank (High capacity) Number of items in package 3 1 BC-12e Photo BJ Cartridge ■ 1-8 Type Product name Black ink Color ink BCI-12 Photo Black Ink Tank BCI-12 Photo Colo
Names and Functions of the Printer’s Parts Front View Introduction 1 BJ Cartridge Access Cover Open to install and replace BJ cartridges and ink tanks. 2 Access Cover Release Button Press this button to open the BJ cartridge access cover. 3 Paper Guide When setting paper, slide this guide to align it with the left edge of the paper. 4 Manual Feed Slot Use this slot for loading single sheets of paper to be printed.
Back View 14 Back Cover Open this cover when cleaning inside the printer or clearing paper jams. 15 Parallel Connector Port Connects to a parallel printer cable. 16 USB Connector Port Connects to a USB cable. 17 Power Connector Connects to the AC adapter. Control Panel 18 POWER Light Lights when the power is on. 19 POWER Button Switches the power on and off. 20 BUSY Light Lights while data is being received. Flashes during print head cleaning and when an error occurs.
Turning the Power On and Off Introduction Turning On the Power Confirm that the connected Internet device is turned off. If the Internet device is turned on first, it may not detect the printer. Make sure you turn the printer on first. Make sure the printer is plugged in and press the POWER button on the printer. The POWER light comes on. Turn on the connected Internet device. If the power does not come on: Refer to Chapter 5, Troubleshooting.
Turning the Power Offitching the power OFF Press the printer’s POWER button. After turning off the printer, wait at least three seconds before turning it back on again. Do not unplug the power cord from the power outlet while the BUSY light is flashing. If you turn off the power while the BUSY light is flashing, the BJ cartridge ink nozzles are not capped and will dry, causing an ink blockage.
Getting Help From Canon ■ 24-hour, 7-day-a-week, toll-free automated support for troubleshooting issues on most current products (1-800-423-2366) ■ Speak to a technician free of service charge (currently Monday—Friday 8:00 a.m. to 10:00 p.m. and Saturday 12:00 p.m. to 6:00 p.m. EST, excluding holidays) for products still under warranty** (1-757-413-2848) ■ Speak to a technician (currently $24.
Servicing the Printer The Canon LR1 Color Bubble Jet Printer is designed with the latest technology to provide trouble-free operation. The Warranty Card that comes with the printer describes Canon’s limited warranty for your Bubble Jet printer. Be sure to read the warranty information to find out about the different service options available to you. Save your sales receipt for proof of purchase. In the event that your printer needs service, you will need your proof of purchase to obtain warranty service.
Using BJ Cartridges BC-11e Color BJ Cartridge Use for color printing (provided) BC-10 Black BJ Cartridge Ideal for high volume black and white printing (optional) BC-12e Photo BJ Cartridge Ideal for printing high quality color photos (optional) The BJ cartridge contains the print head (where the ink comes out) and the ink tanks. When the ink runs out, replace only the ink tank. Follow these guidelines when using a BJ cartridge.
If Printing Is Unclear or Colors Are Missing If your printing is unclear or colors are missing, one of the following may be the reason: ■ The BJ cartridge print head nozzles are clogged. ■ An ink tank is empty. If printing becomes unclear or colors are missing, print the Nozzle Check Pattern to determine whether each nozzle in the print head is operating correctly. If the print head is clogged, perform the print head cleaning procedure. If the print head is operating properly, replace the ink tank.
A normal Nozzle Check Pattern looks like this: For the BC-11e Color BJ Cartridge or the BC-12e Photo BJ Cartridge Cyan Black If the print head nozzles are clogged, some horizontal lines will have a broken appearance. If this happens, clean the print head. If the ink tank is empty, some colors will not print. If some colors do not print even after you have done the print head cleaning, replace the ink tank. If the problem persists, try replacing the BJ cartridge.
Cleaning the Print Head The LR1 is equipped with two print head cleaning functions: normal print head cleaning and a more powerful deep print head cleaning. Only execute deep print head cleaning when the print quality does not improve after executing normal print head cleaning. Perform print head cleaning only when necessary; unnecessary and repetitious print head cleaning wastes ink. Deep print head cleaning consumes a particularly large amount of ink.
Deep Print Head Cleaning Make sure the printer is turned on. Press and hold the RESUME/CLEAN button until you hear two beeps, wait for one more beep, then release the button. It takes approximately 3 seconds for the third beep to sound after the first two beeps. Be careful not to release the button until you hear the third beep. Print a Nozzle Check Pattern (see page 2-2). Chapter 2 Using BJ Cartridges 2-5 Using BJ Cartridges The green POWER light is on.
Replacing Ink Tanks If the LOW INK lights come on, replace the corresponding ink tank. Ink Type and Ink Replacement The LOW INK lights on the front of the printer prompt you to replace an ink tank when the ink runs low. Confirm the type of ink tank currently installed, and then replace the ink tank.
You can install any combination of BCI-11 and high-capacity BCI-18 ink tanks in a BC-11e Color BJ Cartridge. However, you cannot install both a BCI-11 Black and a BCI-18 Black Ink Tank in the cartridge. For safety reasons, always store ink tanks out of reach of children. If ink is accidentally ingested, consult a physician immediately. (The ink contains isopropyl alcohol 67-63-0.) Do not drop or shake BJ cartridges or ink tanks. If spilled, the ink will stain objects and clothing.
Replacing an Ink Tank Make sure the LR1 is turned on. Do not turn off or unplug the printer while replacing an ink tank. Doing so may cause damage to the BJ cartridge. Press the access cover release button and open the BJ cartridge access cover. The BJ cartridge automatically moves to the center. BJ cartridge access cover Do not touch this cable ➜ Remove the ink tank. ■ Do not remove the green print head unit when replacing ink tanks.
Replacing an Ink Tank Make sure the LR1 is turned on. Do not turn off or unplug the printer while replacing an ink tank. Doing so may cause damage to the BJ cartridge. Press the access cover release button and open the BJ cartridge access cover. The BJ cartridge automatically moves to the center. BJ cartridge access cover Do not touch this cable ➜ Remove the ink tank. ■ Do not remove the green print head unit when replacing ink tanks.
■ Color ink tank — Raise the white tab by lifting it with your finger. BCI-11 Color BCI-18 Color (high capacity tank) For the BC-10 Black BJ Cartridge Raise the gray tab by lifting it with your finger. BCI-10 Black Using BJ Cartridges ■ BCI-17 Black (high capacity tank) For the BC-12e Photo BJ Cartridge ■ Raise the gray tab by lifting it with your finger. BCI-12 Photo Black ■ Raise the white tab by lifting it with your finger.
For the BC-10 Black BJ Cartridge BCI-17 Black ➜ BCI-10 Black Do not touch this part For the BC-12e Photo BJ Cartridge BCI-12 Photo Color Using BJ Cartridges BCI-12 Photo Black Install the new ink tank. Align the arrows (e and f) and set the new ink tank so that it rests at an angle, then gently press down until the ink tank locks into place.
■ Color ink tank BCI-11 Color BCI-18 Color ➜ ➜ For the BC-10 Black BJ Cartridge BCI-10 Black ➜ ➜ 2-12 BCI-17 Black Using BJ Cartridges Chapter 2
For the BC-12e Photo BJ Cartridge BCI-12 Photo Color BCI-12 Photo Black Using BJ Cartridges ➜ ➜ Press the ink light reset button. If you do not press the ink light reset button, the LOW INK light function will not work correctly. Press here when you replace a black ink tank Press here when you replace a color ink tank ➜ Pressing the ink light reset button turns off the LOW INK light(s) corresponding to the button pressed.
Close the BJ cartridge access cover. Print head cleaning starts and the BUSY light flashes. When the printer beeps and the BUSY light goes out, you are ready to print.
Remove the BJ cartridge. Release and raise the green tab with your finger. Using BJ Cartridges Lift here Place the BJ cartridge you just removed in the Ink Cartridge Storage Box. Align these arrows Securely twist the lid. Make sure the box is tightly closed.
Prepare the replacement BJ cartridge. If using a new BJ cartridge, open the packaging and remove the protective orange cap and orange tape. ➜ Protective Orange tape ■ Do not replace the protective orange cap once it has been removed. You may damage the print head. ■ Make sure you remove the protective orange tape. If you do not do so, the ink will not be able to flow out. ■ Do not drop or shake BJ cartridges. If spilled, the ink will stain objects and clothing.
Press the ink light reset buttons only after installing a new BJ cartridge. Press each button, one at a time. Using BJ Cartridges Do not press these buttons when installing a BJ cartridge that has been used before. The printer will not be able to detect when the ink runs out. Close the BJ cartridge access cover. When the printer beeps and the BUSY light goes out, you are ready to print.
2-18 Using BJ Cartridges Chapter 2
Paper Handling This chapter describes the type of paper you can use with the Canon LR1, and how you load the paper. You can stack paper in the paper supply tray to load it automatically or you can manually feed one sheet at a time. You can use either plain paper or high resolution paper. ■ Plain Paper You can use ordinary paper made for use with photocopiers. You can also use Canon Bubble Jet Paper. Paper size: Letter (8.
Important Notes on Paper Do not use any of the following types of paper. Not only will they reduce print quality, but paper jams may also result.
Loading Paper The LR1 provides two methods of feeding paper: from the paper supply tray and from the manual feed slot. Load letter size paper in the paper supply tray. You can also load one sheet at a time in the manual feed slot. ■ Set paper in the paper supply tray with the print side facing down. ■ Set paper in the manual feed slot with the print side facing up. Loading the Paper Supply Tray Pull the paper supply tray all the way out.
Set the paper guide and size guide. You will normally set up the paper supply tray for letter size paper. Settings are also available for A4 size paper. Paper guide Size guide Load the paper and make sure the corners are under the clips. Paper guide Set the paper in the tray with the print side down. Adjust the paper guide so that it is flush with the paper. If there is any gap, paper will feed diagonally and a paper jam may occur. Push the tray all the way into the printer.
Press PUSH on the front of the printer, and pull out the paper output tray extension. Printed documents are stacked in the paper output tray. If possible, remove each sheet as it is printed to avoid getting ink on the back of the next sheet. If you do let printed sheets pile up in the paper output tray, do not allow more than 20 sheets to accumulate in the tray at any one time.
Align the paper guide with the left edge of the paper. Paper guide Press PUSH on the front of the printer, and pull out the paper output tray extension. Using High Resolution Paper After printing High Resolution Paper, fine powder from the paper accumulates inside the printer and paper may not feed properly. Be sure to use the cleaning sheet that comes with the High Resolution Paper to periodically clean the printer.
Pull out the paper supply tray. Remove the peel-off tabs from the cut-outs on the cleaning sheet. Paper Handling Place the side with the exposed sticky cut-outs facing up, and insert the paper so the cut-outs enter the printer first. Push the paper supply tray back into the printer. Push the RESUME/CLEAN button. You will hear a beep and cleaning starts, The cleaning sheet exits from the back cover. Close the back cover and press the RESUME/CLEAN button again.
Clearing Paper Jams FRONT Paper output cover Manual feed slot BACK Paper supply tray Back cover If a paper jams occurs, check the following and gently pull the jammed paper out in the direction indicated by the arrows. If the RESUME/CLEAN light comes on: ■ Paper is not loaded, or paper has not ejected completely. All lights come on. ■ Load paper and press the RESUME/CLEAN button, or remove the jammed paper from the printer.
Maintaining the Printer This section describes printer maintenance and cautions for transporting the printer. Printer Maintenance When maintaining the printer, always follow these precautions: When caring for your printer, turn the power off, and unplug the power cord from the electrical outlet. If you do not unplug the printer and you accidentally turn the power on, the parts inside the printer will start to move and you could be injured.
Cleaning the Printer Turn off the printer and unplug the power cord from the electrical outlet. Wipe any dirt from the outside of the printer (such as around the paper output tray) with a soft cloth that has been moistened with water, then firmly wrung out. Open the BJ cartridge access cover and wipe the back of the flap with a soft damp cloth. Wipe away any ink and paper sediment. Be careful not to bend the plate attached to the BJ cartridge access cover (the cover with ink replacement instructions).
Transporting the Printer When transporting the printer, pack it in its original box and affix all protective materials. Do not remove the power cord from the electrical outlet while the POWER light is on or flashing. Damage to the printer may result. Turn off the power to the Internet device and the printer. Confirm that the POWER light is out. Unplug the printer’s power cord from the electrical outlet and remove the power cord. Disconnect the printer cable.
When using a shipping company to transport your printer, make sure you do the following: ■ Secure the lid of the box with tape. ■ Write “Precision Machinery — Handle With Care” in a prominent location on the outside of the box. When transporting the printer by automobile, be careful not to vibrate or bump the printer. On sunny days, be careful not to leave the printer in a closed vehicle for long periods of time; this may expose the printer to extremely high temperatures.
Troubleshooting This chapter describes remedies for various printer problems. Power Power does not go on Is the power cord properly plugged into the printer and the electrical outlet? Make sure the power cord is securely plugged into the electrical outlet. Then make sure the power cord is securely inserted into the AC adapter and that the AC adapter is plugged into the printer’s power connector port.
Light Number of Beeps Printer Condition and Status/Solution — Normal (setup or cleaning is in process). Wait until the flashing light goes out. The BJ cartridge access cover is open. Close the BJ cartridge access cover. When replacing BJ cartridges and ink tanks, close the access cover after you have finished replacement, then wait until the flashing light goes out. 5-2 — Normal (receiving print data). Wait for printing to begin. 1 Paper is not loaded correctly.
The LOW INK light comes on Is it time to replace the ink tanks? Confirm the type of ink installed in your printer and check the ink tank (see page 2-6). Paper Trouble When Printing The paper is jammed Follow the steps in Clearing Paper Jams (see page 3-8) and remove the paper. The paper does not feed properly Paper does not feed / Paper feeds diagonally You cannot use paper that exceeds 38 lb (105 g/m2) (see page 3-1).
When feeding from the paper supply tray, is the tray inserted properly? Push the paper supply tray firmly into the printer as far as it will go (see page 3-4). After printing on High Resolution Paper, are the rollers soiled? Use the cleaning sheet that came with the High Resolution Paper to clean the rollers (see page 3-6). Paper double feeds Was the paper fanned before loading? Fan the paper thoroughly before loading it into the paper supply tray (see page 3-3).
Paper Trouble After Printing The back side of the paper is soiled Is the paper output tray soiled? Clean the printer (see page 4-2). Is a second page printing before the first one is dry? If you print documents that require some time to dry, such as photos, the printer may eject the next page before the first page is dry. If this happens, remove each page as it prints to avoid stacking.
Trouble When Printing If the printer does not print or stops during printing The printer does not print at all Is the power on? Check whether the POWER light is on. If not, press the POWER button. Is the printer properly connected to the Internet device? Securely connect the power cord and the printer cable.
The last part of the document does not print Is the printer properly connected to the Internet device? Firmly connect the power cord and the printer cable. Printing starts, but stops before it is finished Does the document involve a large amount of data, such as photos and illustrations? When printing documents that involve a large amount of data, it may take several moments before printing starts. If the BUSY light is green, print data is being sent to the printer. Wait for printing to start.
Printing is unclear Is ink flowing properly from the BJ cartridge? The BJ cartridge may be out of certain ink colors, or the print head may be blocked. Print a Nozzle Check Pattern to check the condition of the print head (see page 2-2). If the Nozzle Check Pattern does not print correctly, the print head may be blocked. Perform the print head cleaning procedure (see page 2-4). If you still cannot print, replace the ink tanks (see page 2-6).
White lines appear Is ink flowing properly from the BJ cartridge? The BJ cartridge’s print head may be blocked. Print a Nozzle Check Pattern to check the condition of the print head (see page 2-2). If the Nozzle Check Pattern does not print correctly, perform the print head cleaning procedure (see page 2-4). If you still cannot print, replace the ink tanks and, if necessary, the BJ cartridge (see page 2-6). The ink bleeds Change the type of paper you are using and try printing again.
Colors are wrong Color documents are printed in black ink only Is the BC-10 Black BJ Cartridge installed? When printing in color, install the BC-11e Color BJ Cartridge or the BC-12e Photo BJ Cartridge (see page 2-14). Printed colors differ markedly from those on screen Is ink flowing properly from the BJ cartridge? The BJ cartridge may be out of certain ink colors, or the print head may be blocked. Print a Nozzle Check Pattern to check the condition of the print head (see page 2-2).
Lines do not print straight Is the BJ cartridge correctly installed? Remove the BJ cartridge and reinstall it (see page 2-14). The cartridge does not move into the replacement position Confirm that the printer’s POWER light is green. If the power is not on, refer to “Power does not go on” (see page 5-1). Is the BJ cartridge access cover open? If you leave the BJ cartridge access cover open, the cartridge holder moves to the right (home position) to prevent the print head from drying out.
5-12 Troubleshooting Chapter 5
Printing Method Bubble Jet Ink on demand Printing Resolution Maximum 720 (horizontal) × 360 (vertical) dpi Printing Speed (measured by Canon’s standard pattern) Black printing Color printing Photo printing Fast: Standard: Fast: Standard: High resolution: Specifications Specifications 3.8 ppm 3.5 ppm 1.8 ppm 1.5 ppm 0.1 ppm Printing Direction Uni-directional (or bi-directional, depending on data format) Printing Width 8 in./203.
Paper Supply Tray Capacity Plain paper Maximum 50 sheets (20 lb or 75 g/m2) High Resolution Paper Maximum 40 sheets Maximum capacity Less than 0.2 in/5 mm (approximately) Paper Size Paper supply tray Manual feed slot Paper Weight Paper supply tray Manual feed slot Letter, A4 Letter, A4, B5, A5 Minimum 3.86" (W) × 3.86" (H) Maximum 9.5" (W) × 14.
Printable Area To maintain printing quality, please leave sufficient spacing on all four sides of the printing page. Please note that the dimensions of this area vary according to paper size. The measurements for Letter, A4, A5 and B5 are shown below. Recommended Printing Area ( area): It is recommended that you print within this area. Possible Printable Area ( area): You can print within this area. However, print and paper feed accuracy may be reduced. A4, A5, B5 Size Paper 1.18 in (3 mm) 0.
A-4 Specifications Appendix A
Glossary Automatic feed Refers to one way in which paper can be fed into the printer when the paper supply tray is used. BJ cartridge The printing mechanism that contains the print head unit and ink tanks. Bubble Jet printing CMYK Acronym for cyan, magenta, yellow, and black; the four colors used in the standard color model of the printing industry. Refers to a method of specifying color using CMYK color values. (K is used for black because B is used to represent blue in RGB.
Parallel interface An interface that transmits multiple bits simultaneously (usually in one-byte segments). Your printer has a built-in, Centronics-type parallel interface with bi-directional capability. See also Interface. Platen Printer component that holds the paper in position during ink transfer. Print head The printing mechanism that contains print nozzles and ejects the ink for printing.
A C AC adapter: 1-3—4 Access cover release button: 1-9, 2-8 Accessories: 1-7—8 Canon Authorized Service Facility: 1-14 help: 1-13 referral service: 1-7 Web site: 1-13—14, A-4 Cleaning print head: 2-4—5 printer: 4-2 Cleaning sheet, High Resolution Paper: 3-6—7 Clearing, paper jams: 3-8 COLOR button: 1-9 Colors missing: 2-2 wrong: 5-10 Computer: A-3 Control panel: 1-10 Conventions: iv Customer support: 1-13 B Back cover: 1-10 Back view, printer: 1-10 BC-10 Black BJ Cartridge: 1-7, 2-6, 2-9, 2-11, 2-12, A-
G N Guidelines: 2-1 Normal print head cleaning: 2-4 Nozzle Check Pattern, printing: 2-2—3 H O Handling BJ cartridge: 1-6 paper: 3-1—8 printer: 1-5 High Resolution Paper: 1-9, 3-1, 3-6—7 cleaning sheet: 3-6—7 Operating environment: A-1 signal: A-1 system: A-3 P I Ink, bleeds: 5-9 Ink Cartridge Storage Box: 1-7—8, 2-14 Ink light reset buttons: 1-9, 2-13, 2-17 Ink tanks: 1-8 replacing: 2-6—14 Interface: A-1 Internet device: 1-11 L Lights: 5-1—2 Limited warranty: 1-7 Lines, do not print straight: 5-11 Lo
R S Safety notes: 1-2—6 SB-11 Ink Cartridge Storage Box: 1-7—8, 2-14 Servicing, printer: 1-14 Specifications: A-1—3 Storage environment: A-1 Supplies: 1-7—8 T Technical support: 1-13 Transporting, printer: 4-3—4 Trouble, when printing: 5-6—11 Troubleshooting: 5-1—11 U USB connector port: 1-10 interface: A-1 Index Power: 1-3—4, 5-1 connector: 1-10 consumption: A-1 cord: 1-3—4 does not go on: 5-1 source: A-1 turn off: 1-12 turn on: 1-11 POWER button: 1-10—12 POWER light: 1-10—11 Precautions, printer: 4-1
FCC Regulations Color Bubble Jet Printer, Model K10191 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
