Specifications

39
6 Checking Operations
To maintain the best print quality, the printer is equipped with functions such as self-
diagrostics that allow checking of the internal functions and test print that allows checking of
the print quality. Use these functions whenever necessary such as after preparing and
connecting the printer or whenever you want to check its operating condition.
Test Print
The printer is equipped with test print functions for checking such items as printer status and
print quality. After preparing and connecting the printer, perform a test print to check printer
operations. Follow the instructions below to run a test print.
• The test print is set to A4 paper loaded in a widthwise position. You can use
other paper sizes to print, however the printout data may be reduced in size
or printed to one side of the paper.
1
Press the オンライン key to turn off the オンライン indicator.
▼ Setting can be carried out using the operation panel.
オンライン
排 出
リセット / 実行
ユーティリティ
動作モード
セットアップ
2
Press the ユーティリティ key.
▼ The message [ステータス プリント] appears on the display.
オンライン
排 出
リセット / 実行
ユーティリティ
動作モード
セットアップ
3
Use the ＜ and ＞ keys to select [テスト プリント]. Then press
the ∨ key.
▼ The message [01 テスト プリント] appears on the display and test
printing begins.
オンライン
排 出
リセット / 実行
ユーティリティ
動作モード
セットアップ
00 ｲﾝｻﾂ ｶﾉｳ A4
ﾊｲｼ ﾄﾚｲ
ﾕｰﾃｨﾘﾃｨ
ｽﾃｰﾀｽ ﾌﾟﾘﾝﾄ →
ﾕｰﾃｨﾘﾃｨ
ﾃｽﾄ ﾌﾟﾘﾝﾄ →
01 ﾃｽﾄ ﾌﾟﾘﾝﾄ