Specifications

38
Canceling All Operations (Hard Reset)
When you want to clear all operations and data from the memory follow the instructions
below to carry out a hard reset. When you carry out a hard reset, you lose data received by all
interfaces, jobs in progress and data in the memory.
• If you carry out a reset while the printer is receiving data, data that is not yet
in the memory will be received after the reset has been carried out.
However, in some cases this data may not be properly printed.
• All data in the memory, even data from another interface, will be lost. Care
should be taken not to affect data from other computers when the printer is
connected to a network.
1
Press the オンライン key to turn off the オンライン indicator.
▼ Setting can be carried out using the operation panel.
オンライン
排 出
リセット / 実行
ユーティリティ
動作モード
セットアップ
2
Hold down the リセット key until the message [ハード リセット] appears
on the display.
Press and hold down the key until the message [ハード リセット] appears on the display
(approximately five seconds). If you hold down the key for less than five seconds, a soft reset will
be carried out.
オンライン
排 出
リセット / 実行
ユーティリティ
動作モード
セットアップ
▼ Resetting is complete if the message [00 インサツ カノウ] appears on
the display after the operation panel display and indicators have flashed on
and off.
3
Press the オンライン key to turn on the オンライン indicator.
▼ Printing is enabled.
オンライン
排 出
リセット / 実行
ユーティリティ
動作モード
セットアップ
00 ｲﾝｻﾂ ｶﾉｳ A4
ﾊｲｼ ﾄﾚｲ
00 ｿﾌﾄ ﾘｾｯﾄ
00 ｲﾝｻﾂ ｶﾉｳ A4
ﾊｲｼ ﾄﾚｲ
03 ﾊｰﾄﾞ ﾘｾｯﾄ
00 ｲﾝｻﾂ ｶﾉｳ A4
ﾊｲｼ ﾄﾚｲ