Specifications

13
Removing Jammed Paper
When a paper jam occurs, follow the instructions below to remove it, then print again. If the
message does not disappear even when the jammed paper is removed according to this
procedure, there may be some scraps of paper left inside. Inspect each part of the printer again
and completely remove any jammed paper.
Return the printer to on-line status once the message [00 インサツ カノウ] appears on
the display. Printing is restarted from the page which was interrupted.
• Leave the printer turned on while removing jammed paper. If you turn the
power off, the printing data will be deleted.
• If you use too much force when removing jammed paper, the paper might
tear or the internal parts of the printer might be damaged. Remove jammed
paper by pulling it in the correct direction.
• If the jammed paper is torn, look for any remaining scraps of paper and
remove them.
Procedure for Removing Jammed Paper
1
Locate the jammed paper by referring to the message on the display.
Apperas when paper jams.
The location of the paper jam is displayed.
If there is more than one paper jam, 
they are all displayed in sequence.
13 ﾖｳｼｶﾞ ﾂﾏﾘﾏｼﾀ
ﾎﾝﾀｲ ﾐｷﾞｶﾊﾞｰ
2
Remove the jammed paper.
Remove any jammed paper from each of the various possible paper jam locations according to the
instructions on the following pages.
3
When all the jammed paper has been removed, close all the covers and check
the display message.
If there is still an error message, carry out an inspection again.
Off
00 ｲﾝｻﾂ ｶﾉｳ A4
ﾊｲｼ ﾄﾚｲ
印刷可
メッセージ
ジョブ
オンライン
排 出
リセット / 実行
両 面
給排紙選択
ユーティリティ
動作モード
セットアップ
• The error message might not disappear if paper is removed without
opening a cover, for example from the paper tray area, output tray area or
output sub-tray area. If this happens, always open the top cover once and
then close it again.