Specifications

7
■ No. of Sheets Stored in Paper Sources
Paper source
Paper type
Paper tray Paper cassette 250-sheet 500-sheet
paper feeder paper feeder
(option) (option)
Plain paper (64 g/m
2
) approx. 100 approx. 250 approx. 250 approx. 500
Thick paper (128 g/m
2
) approx. 50 × × ×
Transparencies approx. 50 × × ×
Label sheet approx. 40 × × ×
Postcard approx. 40 × × ×
Stamped, self-addresed postcard approx. 40 × × ×
Envelope Youkei No.4 approx. 10 × × ×
■ No. of Sheets Output
Paper type
Output
Face-down tray Face-up tray
Plain paper (64 g/m
2
) approx. 250 approx. 50
Thick paper (128 g/m
2
) approx. 150 approx. 25
A3 full breed × approx. 25
Ledger full breed × approx. 25
Transparencies approx. 100 1
Postcard approx. 100 approx. 20
Stamped, self-addresed postcard approx. 100 approx. 20
Envelope Youkei No.4 approx. 100 approx. 10
● Load plain paper of over 90 g/m
2
into the paper tray.
● Always load user paper (user defined paper) lengthways.
● Optional extra RAM is necessary for printing on paper larger than Ledger
size, such as A3 full breed paper (312
× 440 mm).
● A3 full breed paper (312 × 440 mm), ledger full breed paper (304.8 ×
457.2 mm; 12" × 18"), user paper (grater than 297 × 431.8mm or less
than 100
× 148.5mm) and index cards (76.2 × 127 mm; 3" × 5") can only
be output face up. They cannot be output face down.
● Printing speed might be reduced due to conditions such as the type or size
of the paper.
● If a 500-sheet paper feeder is installed, you can load a maximum of 500
sheets (64 g/m
2
) into the 500-sheet paper cassette.
● If a 500-sheet paper feeder is installed, you can also load letter R paper and
user paper into the 500-sheet paper cassette.
● When loading user paper into the 500-sheet paper cassette, the allowed
dimensions of the paper are 210-297 mm wide and 127-432 mm long. There
is a groove of approximately 2 mm wide and 1 mm long, so that you can set
the side and rear paper size guide inside the cassette.