Specifications

● Thick paper

Paper which is 106-128 g/m

can be used with this printer. Always load paper of this thickness

into the paper tray.

● When printing with thick paper, always set [用紙タイプ] in the printer driver’s

[給紙] sheet (or [デフォルト用紙タイプ] in the set-up menu if you are using

an OS which cannot run a Windows printer driver) to [厚紙].

● Transparencies

It can be difficult to separate transparencies from each other. Pick them up one at a time and by

all four sides, and then load them into the paper tray.

● When printing on transparencies, always set [用紙タイプ] in the printer

driver’s [給紙] sheet (or [デフォルト用紙タイプ] in the set-up menu if you

are using an OS which cannot run a Windows printer driver) to [OHP].

● When printing face up on transparencies, remove the transparencies one at

a time as they come out.

● Label sheet

Check that the label sheet is face up when you load it into the paper tray.

● Do not use the following types of label sheet. There is a risk of severe jamming

and damage to the inside of the printer.

・ Label sheet with some adhesive surfaces exposed

・ Label sheet with some parts of the lower surface exposed on the upper

surface

・ Label sheet with labels that peel off easily

● When feeding label sheet sideways, remove each sheet by hand one at a

time. The first sheets printed out might curl.

● Duplex printing with a duplex unit

● If both a 500-sheet paper feeder and a duplex unit are installed, you cannot

duplex print with the duplex unit on user paper loaded in a 500-sheet paper

cassette.