User`s guide
2-5
Loading and Outputting Paper
2
Paper Requirements
■ Envelope
The envelopes that can be used with this printer are as follows:
Envelopes can be loaded in the manual feed slot.
* Envelopes that have a flap on the short edge cannot be used with this printer.
IMPORTANT
•
Do not use the following types of envelopes. Using inappropriate envelopes may result in
paper jams that are difficult to clear or may result in damage to the printer.
- Envelopes with fasteners or snaps
- Envelopes with address windows
- Envelopes with adhesive on the surface
- Wrinkled or creased envelopes
- Poorly manufactured envelopes in which the glued parts are uneven
- Irregularly-shaped envelopes
•
Before loading the envelopes, flatten the stack of envelopes to release any remaining air,
and press the fold lines along the edges tight.
•
Do not print on the reverse side (glued side) of envelopes.
•
When loading an envelope, load it so that the flap is toward the left of the printer when
viewed from the front.
( : Feeding direction)
Envelope DL
(110.0 mm x 220.0 mm)
Envelope COM10
(104.9 mm x 241.3 mm)
Envelope C5
(162.0 mm x 229.0 mm)
Envelope Monarch
(98.5 mm x 190.5 mm)