User`s guide
6-27
Optional Accessories
6
Network Board
■ Setting the Network Transmission Speed/Transfer Mode and the DIP
Switches
1
Open the expansion slot cover.
2
Turn the printer and computer OFF, remove the USB cable,
and then disconnect the power plug from the AC power outlet.
3
Remove all the interface cables and the power cord from the
printer.
4
Remove the two screws and remove the network board.
IMPORTANT
Do not touch the network board parts, printed wire, or connectors with your hands.
Communication speed and
Transmission mode of LAN
10BASE-T/Half-duplex
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
Auto detect (default setting)
10BASE-T/Full-duplex
100BASE-TX/Half-duplex
100BASE-TX/Full-duplex
DIP switch setting
OFF
1234
OFF
1234
OFF
1234
OFF
1234
OFF
1234