User`s guide

6-25
Optional Accessories
6
Network Board
11
Connect the USB cable as needed.
12
Press " " of the power switch to turn the printer ON.
IMPORTANT
If the printer does not operate properly, or an error message appears in the Printer
Status Window, see "Troubleshooting," on p. 7-1.
13
Make sure that the LNK indicator (green) on the network
board is on.
If the network board is connected by 10BASE-T, the board is working properly
when the LNK indicator is on.
If the network board is connected by 100BASE-TX, the board is working properly
when the LNK indicator and 100 indicator are on.
((A): ERR Indicator (B): LNK Indicator (C): 100 Indicator)
If the network board is not working properly, turn the printer OFF, and then check
the LAN cable connection, hub performance, and network board installation.
(A)
(B)
(C)