User`s guide

4-36
Printing a Document
Using the Various Printing Functions
4
* Perform the following procedure regardless of the setting for this option if [Paper Source] is set to [Auto].
When the settings for [Output Size] and the [Register Paper Size in Cassettes] dialog box are different, a
message appears, then printing is paused.
When printing on paper of the size specified in [Output Size], load the appropriate paper in the paper cassette
and specify the appropriate paper size in the [Register Paper Size in Cassettes] dialog box or load the
appropriate paper in the manual feed slot.
■ [Advanced Settings] Dialog Box
The following dialog box is displayed by clicking [Advanced Settings] in the [Finishing
Details] dialog box.
This dialog box allows you to specify the finishing details.
[Use Skip Blank Pages Mode]
When the check box for this option is selected, blank
paper is not output if the job includes blank pages.
[Advanced Settings]
Allows you to specify the settings in the [Advanced
Settings] dialog box when you want to print jagged
lines of the text and graphics smoothly or specify
whether to print the last page in the 1-sided mode
during 2-sided printing. Also, if you are using
Windows 2000/XP/Server 2003, you can specify
whether the print data is spooled in EMF (meta file)
format.
Setting/Button Contents
[Image Refinement]
Specifies whether to perform Image Refinement.
When Image Refinement is performed, jagged lines
of text and graphics are printed smoothly.
[EMF Spooling] (Windows 2000/
XP/Server 2003 only)
Specify whether the print data is spooled in EMF
(meta file) format.
[Print Last Page in 1-sided Mode
when 2-sided Printing is Set]
When this check box is selected and the last page for
the 2-sided printing is 1-sided printing, printing can be
performed faster than normal 2-sided printing.
Setting/Button Contents