User`s guide
4-35
Printing a Document
4
Using the Various Printing Functions
■ [Finishing Details] Dialog Box
The following dialog box is displayed by clicking [Finishing Details].
This dialog box allows you to specify various settings for print processing.
Setting/Button Contents
[Gutter]
When a value is specified, a margin of white space is created on
one side of the printed paper (This margin is called [Gutter]). The
gutter is useful when binding pages. Valid values for [Gutter] range
from 0 to 30 mm.
[Image Processing]
When [Gutter] is specified, the position of the page image is
adjusted to make room for the gutter. At this point, you can select
whether to reduce the size of the image to fit the remaining space.
Setting/Button Contents
[Detect Paper Size in Cassette]*
This option detects the paper size and allows you to
specify whether to pause a print job temporarily when
[Paper Source] in the [Paper Source] sheet is set to
[Cassette 1] or [Cassette 2] (the optional paper
feeder).
If this check box is selected, a message is displayed,
and the job is paused when the paper size specified
in [Output Size] in the [Page Setup] sheet is different
from the paper size specified in the [Register Paper
Size in Cassettes] dialog box in the Printer Status
Window.
When printing on paper of the size specified in
[Output Size], load the appropriate paper in the paper
cassette and specify the appropriate paper size in the
[Register Paper Size in Cassettes] dialog box.
If this check box is cleared, the job uses the currently
loaded paper without displaying a message even if
the settings for the paper size are different.
[Rotate Print Data 180 Degrees]
(See p. 4-59)
Prints with the image 180 degrees rotated.
This option is useful for printing envelopes and Index
Card that can be fed only in specific orientations.