User`s guide

3-52
Installing the CAPT Software
Setting Up the Printing Environment
3
16 Click [Finish].
Copying files is started.
When printing a test page, a dialog box will appear after printing. Click [OK] to
close the dialog box.
NOTE
If the [Hardware Installation] dialog box appears, click [Continue Anyway].
17 If the printer and computer are not connected, turn the
computer off, connect the computer and printer with a USB
cable, and then turn them ON.
IMPORTANT
If you are using a computer with Windows XP Service Pack 2 or another operating
system equipped with Windows Firewall as the print server, you need to configure
Windows Firewall to unblock communication with the client computers. (See p. 8-
10)
The installation of the printer driver is completed.