Specifications

14
■ No. of Sheets Stored in Paper Source
Paper source
Paper type
Paper tray Cassette 1 Cassette 2 Cassette 3 Cassette 4 Paper deck
(option) (option) (option)
Plain paper (64 g/m
2
) approx. 100 approx. 500 approx. 500 approx. 500 approx. 500 approx. 2,000
Thick paper (128 g/m
2
) approx. 50
×××××
Glossy paper approx. 50
×××××
Transparencies approx. 50
×××××
Label sheet approx. 40
×××××
■ No. of Sheets Output
Output
Paper type Output tray Sub-output tray Bins 1-7
(non-sorter bin) (option)
Plain paper (64 g/m
2
) approx. 300 approx. 100 120 sheets for each bin
Thick paper (128 g/m
2
)
△*
4
approx. 50
×
Glossy paper
△*
4
1
×
Transparencies
△*
4
1
×
Label sheet
△*
4
approx. 40
×
*4 If a bin in a 7-bin sorter is specified for output, printing is carried out and an error skip is
performed, the paper will be output into the output tray. You can also set a standard output
destination, but because that may result in curled or wrinkled paper, we recommend that the
sub-output tray (non-sorter bin) be used.
● When printing on both sides of a sheet of paper, always use the optional
duplex unit. Do not make a manual duplex print from the paper tray.
● If you have loaded A3- or Ledger-size paper into a tray, make sure that the
paper is at least 75 g/m
2
.
● When you load A5- or B5-size paper into the paper tray, load it in the
lengthwise feed direction.
● When you load label sheet into the paper tray, insert it in the lengthwise feed
direction. If you have set [トレイ ヨウシ サイズ ] in the paper feed menu to
[A4R] or you have set it to [フリー], set [ヨウシノムキ] to [タテオクリ].