User`s guide

26
To load a stamped, self-addressed postcard in the multi-purpose tray, gently
insert the postcard as far as it will go into the printer, with the print side facing
down, and the top edge on the right.
IMPORTANT
• There must be some space left between the stack of postcards and limit guide. Do
not use force when loading the stack of postcards as this may cause a paper feed
failure.
• Never use stamped, self-addressed postcards with creases.
• Be sure to load stamped, self-addressed postcards in the portrait orientation. You
cannot load them in the landscape orientation. Furthermore, when you print on a
stamped, self-addressed postcard, make sure that the application page setup and
orientation settings match the way the postcard is loaded in the multi-purpose tray.
(Example: For Windows NT 4.0/Windows 2000, select [
往復はがき横
].)
5
Slide the paper guides so that they closely fit the right and left
edges of the postcard.
IMPORTANT
• Be sure to set the paper guides to the postcard width. Misfeeds or paper jams may
occur if the paper guides are too loose or too tight.