User`s guide

3-4
Appendix
3
■ TCP/IP Settings
Available Software for Network Settings
You can specify the network settings of the machine using the following software:
=Available
=Unavailable
*: The mark indicates that only some of the items can be set. (See “Network Setting Items,” on p.
3-2.)
Item Setting Description Default Setting
Use DHCP Whether DHCP is used in setting the IP address (On)
Use BOOTP Whether BOOTP is used in setting the IP address (Off)
Use RARP Whether RARP is used in setting the IP address (Off)
IP address IP address of the machine 0.0.0.0
Subnet Mask Subnet Mask 0.0.0.0
Gateway Address Gateway Address 0.0.0.0
Item
NetSpot
Console
NetSpot
Device
Installer
Web
Browser
(Remote UI)
ARP/PING
Commands
The Machine
Operation
Panel
TCP/IP Preparation
for Protocol Settings
(See p.2-2.)
TCP/IP
Protocol Settings
(See p.2-5.)
**