User`s guide

2-4
Specifying the Network Settings
2
Settings Using NetSpot Device Installer
The following is the procedure for specifying the settings using NetSpot Device Installer.
1 Insert the CD-ROM supplied with the printer into the CD-ROM drive.
2 Double-click the [My Computer] icon on the screen ➞ right-click the CD-ROM drive icon ➞ click [Open] on
the pop-up menu.
3 In the [NetSpot_Device_Installer] folder on the CD-ROM, run [nsdi.exe].
4 From the list, select the device whose [Device Name] is the MAC address of the printer with <Not
Configured> displayed in [Status].
5 Right-click the selected device ➞ click [Initial Settings] on the pop-up menu.
6 In the [Initial Settings] dialog box, specify the following items ➞ click [Next].
[Subnet]: If the computer on which NetSpot Device Installer runs is connected to more than one
network, select the subnet that the desired device belongs to.
[Product Type]: Select the product name of your machine. If the product name of your printer is not displayed,
select [MF5770].
7 Specify the TCP/IP protocol.
[IP Address Settings with]: Select the method for setting the IP address.
• [Manual Setting]: You need to set the IP address manually. The IP address
that you enter in [IP Address] is assigned to the network
board.
• [DHCP]: The IP address is automatically obtained via DHCP (a
DHCP server needs to be active on the network).
[IP Address]: Enter the IP address assigned to the network board.
[Gateway Address]: Enter the gateway address used for the TCP/IP network.
[Subnet Mask]: Enter the subnet mask used for the TCP/IP network.
[Broadcast Address]: Enter the broadcast address used for the TCP/IP network.
NOTE
• The settings for [IP Address], [Gateway Address], [Subnet Mask], and [Broadcast Address] cannot be
entered if [DHCP] is selected from [IP Address Settings with].
• If a DHCP server cannot be used, select [Manual Setting] from [IP Address Settings with].
8 Confirm the settings you specified ➞ click [OK].