Instruction manual

49
Step
6
IMPORTANT
If the duplex unit is not installed on the printer firmly (if there is any space
between the rear of the printer and the duplex unit), this may result in misfeeds.
5
Connect the interface cables except for the USB cable, and
connect the power cord.
6
Plug the power plug into the AC power outlet.
7
Connect the USB cable.
NOTE
After installing the duplex unit, you have to specify the settings for the
optional accessories in the [Device Settings] sheet in the printer driver. You
can obtain the status of the optional accessories automatically by clicking
[Get Device Status] in the [Device Settings] sheet.
Installing the Network Board
LICENCE AGREEMENT
Canon Software License Agreement
Read carefully the terms and conditions of use given below before using the
Software. By using the Software you agree to abide by the following terms
and conditions of use and enter into a legal agreement with Canon Inc.
("Canon"):
1. The title to and all rights of the Software and reproductions thereof are
reserved to Canon or Canon's licensors depending on the contents.
2. Canon hereby grants the Software's users ("the User") a non-exclusive
license to use the Software for use with certain Canon's Products
compatible with the Software.
3. The User shall not modify, alter, reverse engineer, decompile, disassemble
or otherwise change any part or all of the Software.
4. Canon, Canon's subsidiaries and Canon's licensors extend no warranties
of any kind as to the Software including but not limited to warranties of
fitness or usefulness for the User's particular purposes and lack of defects.
5. In no event shall Canon, Canon's subsidiaries or Canon's licensors be
liable for any direct, indirect or other losses or damages whatsoever arising
out of, incidental to or in connection with the use of the Software.
6. The User shall not export, directly or indirectly, any part or all of the
Software without obtaining necessary approvals from the Japanese
government or the governments concerned.
The User shall not export or re-export any part of the Software to any
country the U.S. government prohibits exports to.
The User shall not export or re-export any part of the Software to any
person or organization the U.S. government prohibits any trade with.
The User shall not provide the Software for any person from the country
the U.S. government prohibits exports to.