Instruction manual

27
Step
3
Switching to the Output Tray
Switch an output tray to the output tray using the following procedure.
1
Close the tray extension and auxiliary tray a, then close the
sub-output tray b.
2
Select [Auto] or [Output Tray] in [Paper Output] in the
[Finishing] sheet in the printer driver.
Make sure that the sub-output tray is closed before selecting [Auto]. If the sub-
output tray is opened, printed paper is output to the sub-output tray.
NOTE
When installing the printer driver, see "Connecting the Printer to a
Computer and Installing the CAPT Software," on p. 29 in Step 5.
a
b