Instruction manual

20
Step
3
10
Set the paper cassette in the printer at an angle as shown in
the figure a, then push it into the printer gently and
horizontally b.
Push the paper cassette into the printer firmly until the front side of the paper
cassette is flush with the front surface of the printer.
CAUTION
When setting the paper cassette in the printer, be careful not to catch
your fingers.
Loading Paper in the Multi-purpose Tray
The multi-purpose tray can be loaded with plain paper (60 - 90 g/m
2
) at sizes of
A3, B4, A4, B5, A5, Ledger (11 x 17), Legal, Letter, Executive, Index Card, 8K,
and 16K. You can also load heavy paper, transparencies, labels, envelopes,
and paper of the following custom paper sizes.
- When loading paper in portrait orientation: Width 98.0 to 312.0 mm; Length
148.0 to 470.0 mm
b
a
Paper Level Indicator
The paper cassette has a paper level indicator (A) that shows the
amount of paper remaining in the cassette. If the cassette is full, the
paper level indicator is at the top. Because the indicator moves down
as the amount of paper drops, this gives a rough estimate of the
amount of paper remaining.
(A)