Setup guide

NetWare Print Service Settings
3-8
Using a NetWare Network (Windows)
3
8 If you are using the Remote Printer mode, start the print
server.
❑ If you are using a NetWare file server as the print server, enter “Load
PSERVER.NLM (print server name)” on the file server on the console screen
➞ press [ENTER] on the keyboard.
❑ If you are using a dedicated print server, enter “PSERVER.EXE” ➞ enter the
print server name ➞ press [ENTER] on the keyboard.
NOTE
This step is not required if you are using the Queue Server mode.
NetWare print service settings are complete. Proceed to “Protocol Settings,” on p. 3-9.