Setup guide

Setting Up a Computer for Printing
2-30
Using a TCP/IP Network (Windows/UNIX)
2
❑ Click [Next].
❑ In [Printer Name or IP Address], enter the printer’s IP address or host name ➞
click [Next].
After the computer has confirmed that there is a printer at the IP address you entered,
the Completing the Add Standard TCP/IP Printer Port Wizard window appears.
If the dialog box displays <Additional Port Information Required>, follow the instructions
on the screen to search again, or select [Standard-Canon Network Printing Device with
P9100] from the Device Type drop-down list ➞ click [Next] to exit the Wizard.
❑ Click [Finish].
❑ Click [Close] to close the [Printer Ports] dialog box.
4 If you want to use Raw, change the port configuration
information.
If you are using LPR, this step is not required.
❑ Click [Configure Port].