Fax Driver Guide - Océ

Specifying the Installed Optional Fax Board
2-53
2
Getting Started
NOTE
• After the optional fax board is selected, set the telephone line for fax transmission
from [Line Selection] in the [Special] sheet.
• Clicking [Get Device Status] automatically specifies the optional fax board. If you
are using a shared fax in the Print Server (Point and Print) environment, however, it
is necessary to install the Canon Driver Information Assist Service in the server PC
in order to set up the fax configuration automatically by clicking [Get Device
Status]. (See "Installing the Canon Driver Information Assist Service," on p. 2-39.)
• If you are using a local fax (connected to an LPT port, USB port, etc.), you cannot
set up the fax configuration automatically.