Fax Driver Guide - Océ

Specifying the Installed Optional Fax Board
2-51
2
Getting Started
Specifying the Installed Optional Fax Board
Before sending a document by fax, you may need to specify the optional fax board
installed in your fax.
The fax configuration can be setup automatically while installing the driver,
depending on the port selected for the machine. If the machine cannot be
configured automatically, follow the procedure below in order to do it manually.
NOTE
• A fax board can be specified for the Color imageRUNNER C2880, Color imageRUNNER
C2880-J1, Color imageRUNNER C3380, Color imageRUNNER C3380-J1, Color
imageRUNNER C4080, Color imageRUNNER C4080-H1, Color imageRUNNER C4580,
Color imageRUNNER C4580-H1, Color imageRUNNER C5180, Color imageRUNNER
C5180-H1, imageRUNNER C3170, imageRUNNER 2010F, imageRUNNER 2870/2270,
imageRUNNER 2870G/2270G, imageRUNNER 3025, imageRUNNER 3030,
imageRUNNER 3035/3045, imageRUNNER 4570/3570, imageRUNNER 4570G/3570G,
imageRUNNER 5070, imageRUNNER 6570/5570, and LASER CLASS 700 Series.
• You can specify the line to use for fax transmission after specifying the optional fax board.
1 On the [Start] menu, point to [Settings] ➞ click [Printers].
NOTE
• If you are using Windows XP Professional/Server 2003, on the [Start] menu, click
[Printers and Faxes].
• If you are using Windows XP Home Edition, on the [Start] menu, click [Control
Panel]
➞ [Printers and Other Hardware] ➞ [Printers and Faxes].
2 In the [Printers] folder, right-click the printer icon for your fax
➞ click [Properties].