Fax Driver Guide - Océ

Installing the Software
2-47
2
Getting Started
8 Restart the computer.
9 Check the fax configuration settings in the [Configuration]
sheet (for Windows 98/Me) or [Device Settings] sheet (for
Windows 2000/XP/Server 2003), and then reconfigure them if
they have been changed.
NOTE
• For the imageRUNNER 400/330 and imageRUNNER 400/330-P1/R1,
[Configuration] sheet is displayed regardless of the operating system you are
using.
• If you are using a shared fax in the Print Server (Point and Print) environment, it is
necessary to install the Canon Driver Information Assist Service in the server PC in
order to set up the fax configuration automatically or to use the Job Accounting
feature. (See "Installing the Canon Driver Information Assist Service," on p. 2-39.)
Updating the Alternate Fax Driver (Windows 2000/XP/
Server 2003)
If you use a shared fax on a network, and an alternate fax driver is installed on the
server, the alternate fax driver is updated simultaneously when you install a new
driver with the Installer. To update the alternate fax driver manually without using
the Installer, follow the procedure below.
1 On the [Start] menu, point to [Settings] ➞ click [Printers].
NOTE
• If you are using Windows XP Professional/Server 2003, on the [Start] menu, click
[Printers and Faxes].
• If you are using Windows XP Home Edition, on the [Start] menu, click [Control
Panel]
➞ [Printers and Other Hardware] ➞ [Printers and Faxes].
2 Click [Server Properties] on the [File] menu to open the [Print
Server Properties] dialog box ➞ click the [Drivers] tab.