Fax Driver Guide - Océ

Installing the Software

2-25

Getting Started

USB Connection Installation

If your printer supports a USB port, you can send faxes via the USB port. The

following fax driver installation methods enable you to do so.

■ If a USB driver has been installed on your computer:

If you have performed a USB installation using the Canon PCL5c, PCL5e, PCL6, PS,

UFR, or UFR II printer driver on your computer, the USB driver has already been installed.

In this case, you can install the fax driver by following either the standard installation or the

Add Printer Wizard procedure.

■ If a USB driver has not been installed on your computer:

Install the USB driver and the fax driver according to the Plug and Play procedure.

NOTE

•

If you are using the Color imageRUNNER C2620, Color imageRUNNER C2880, Color

imageRUNNER C3200, Color imageRUNNER C3220, Color imageRUNNER C3380,

Color imageRUNNER C4080, Color imageRUNNER C4580, Color imageRUNNER

C5180, imageRUNNER C3100, imageRUNNER C3170, imageRUNNER C5800,

imageRUNNER C6800, imageRUNNER 2016, imageRUNNER 2020, imageRUNNER

2230, imageRUNNER 2830, imageRUNNER 2870/2270, imageRUNNER 2870G/2270G,

imageRUNNER 3025, imageRUNNER 3030, imageRUNNER 3035/3045,

imageRUNNER 3530, imageRUNNER 4570/3570, imageRUNNER 4570G/3570G,

imageRUNNER 5070, imageRUNNER 6570/5570, LASER CLASS 510, MF4150, or

MF7280, you can fax in a USB environment. However, you cannot set up the fax

configuration automatically or use the Job Accounting feature in a USB environment.

•

If you are using an operating system equipped with Windows Firewall, the Found New

Hardware Wizard may be displayed during installation. In this case, select [No, not this

time]

➞

click [Next]

➞

install the USB driver and fax driver according to the Plug and Play

procedure.

USB Standard Installation

Start the Installer ➞ follow the instructions in the dialog

boxes.

See steps 1 to 9 of "Standard Installation," on p. 2-3.