Fax Driver Guide - Océ

Installing the Software

2-13

Getting Started

Click [Restart] or [Exit] to finish the installation.

The printer icon is displayed in the [Printers] folder. The driver is now installed.

Dynamic Installation

If you are using a printer connected to a network using TCP/IP protocol, you can

automatically search for its printer port. To install the fax driver by dynamic

installation, follow the procedure below.

IMPORTANT

You can search only for printers in the same subnet as your computer.

NOTE

•

If you are using a local printer or a printer connected to a network using a protocol other

than TCP/IP, see "Standard Installation," on p. 2-3.

•

Dynamic Installation is not available for the LASER CLASS 510, because this model

does not come with a network interface.

Insert the Fax Driver Software CD-ROM into the CD-ROM drive

➞ wait for the installation process to start.

If nothing happens, double click the [My Computer] icon ➞ the CD-ROM drive

icon ➞ the [Minst.exe] icon to start the installation process.

If you cannot find the [Minst.exe] icon on your CD-ROM, follow the steps below.

1. Double-click the following folders: [FAX] ➞ [us_eng] ➞ double-click the

[Setup.exe] icon to start the installation process.

2. Click [Next].

3. Read the license agreement carefully.

If you agree to the terms ➞ click [Yes] to proceed to step 6.

NOTE

Depending on the software or the operating system you are using, a screen for

selecting the language to be used for the installer may be displayed before

installing.