Fax Driver Guide - Océ

Installing the Software

2-3

Getting Started

Standard Installation

Standard installation is when you select an existing printer port manually.

You can also install a network printer or set up a shared printer by following the

procedure below.

NOTE

If you are using a printer connected to a network using TCP/IP protocol, you can

automatically search for a port to install the fax driver. For instructions, see "Dynamic

Installation," on p. 2-13.

Insert the Fax Driver Software CD-ROM into the CD-ROM drive

➞ wait for the installation process to start.

If nothing happens, double click the [My Computer] icon ➞ the CD-ROM drive

icon ➞ the [Minst.exe] icon to start the installation process.

If you cannot find the [Minst.exe] icon on your CD-ROM, follow the steps below.

1. Double-click the following folders: [FAX] ➞ [us_eng] ➞ double-click the

[Setup.exe] icon to start the installation process.

2. Click [Next].

3. Read the license agreement carefully.

If you agree to the terms ➞ click [Yes] to proceed to step 6.

NOTE

Depending on the software or the operating system you are using, a screen for

selecting the language to be used for the installer may be displayed before

installing.