Fax Driver Guide - Océ

Installing the Software
2-2
2
Getting Started
Installing the Software
This section describes instructions for installing the software.
Installing the Fax Driver
Before using the fax function on your printer, you must install the fax driver for it.
Refer to the figure below in order to decide which procedure to use and read the
corresponding pages in this manual.
IMPORTANT
• For Windows 2000/XP/Server 2003, log on as the Administrator when you install the
driver.
• If you use the Installer, you can also update existing drivers simultaneously while
installing a new driver, or update existing drivers without installing a new driver. Canon
machines whose fax drivers can be updated are listed under "Supported Canon
Products," on p. 1-2.
With the Installer
To automatically find
a network printer port
See "Dynamic Installation,"
on p. 2-13.
To configure a USB
printer port in a USB
driver installed
environment
See "USB Installation Using
the Add Printer Wizard," on
p. 2-26.
To configure a USB
printer port
See "USB Standard
Installation," on p. 2-25 of
"USB Connection Installation."
To manually configure
the printer port
See "
Standard Installation, "
on p. 2-3.
Without the Installer
To install the printer
driver for a local or
network printer
See "Using the Add Printer
Wizard," on p. 2-23.
To install the printer
driver through a USB
connection
Depending on your OS, see
"Plug and Play Installation"
(p. 2-27 to p. 2-39) of "USB
Connection Installation."