Fax Driver Guide - Océ

System Requirements

1-7

Before You Start

IMPORTANT

If you are using the Color imageRUNNER C2620-C1, Color imageRUNNER C2620-C2,

Color imageRUNNER C2880-J1, Color imageRUNNER C3200-C1, Color

imageRUNNER C3220-C1, Color imageRUNNER C3220-C2, Color imageRUNNER

C3380-J1, Color imageRUNNER C4080-H1, Color imageRUNNER C4580-H1, Color

imageRUNNER C5180-H1, imageRUNNER C3100-E1, imageRUNNER C5800-D1,

imageRUNNER C5870-G1, imageRUNNER C6800-D1, imageRUNNER C6870-G1,

imageRUNNER 400/330, imageRUNNER 400/330-P1/R1, imageRUNNER 5070-S1,

imageRUNNER 5570-S1, imageRUNNER 6570/5570-M3, or imageRUNNER 6570-S1,

after selecting a port, you need to specify a queue as described below. (You cannot

specify <Direct> as the queue for the imageRUNNER 400/330.)

-LPR

For Windows TCP/IP, enter either <Print>, <Hold>, or <Direct> as the queue.

-RAW

The following four port numbers are available:

9100: Enter either <Print>, <Hold>, or <Direct> as the queue.

9101: The queue will be set to <Direct>.

9102: The queue will be set to <Print>.

9103: The queue will be set to <Hold>.

-SMB

Select any of the three queues displayed after selecting a printer from the network tree.