Facsimile manual

Setting Up Coded Speed Dialing
2-23
2
Using Speed Dialing
● If you select ‘FIXED’:
❏ Press [▼] or [▲] to select a line ➞ press [Set].
28 If you want to select a sender name, press [▼] or [▲] until
<8.SENDER NAME> appears ➞ press [Set].
If you do not want to perform this setting, proceed to step 30.
29 Press [▼] or [▲] to select a sender name ➞ press [Set].
If you want to set up other coded speed dialing codes, repeat this procedure
from step 2.
This completes all the optional settings for a coded speed dialing code.
NOTE
To perform this setting, you had to previously register sender’s names.
30 Press [Stop] to return to the Standby mode.
➞
➞
➞
Set
Set
Set
Stop