Specifications

Installing Printer Driver

Installing the Printer Driver on Your Computer

2-7

Installing Printer Driver without a USB Connection

The following is the installation procedure of the user software without using a USB connection, under Windows 98/Me/

2000/XP. The screen shots shown are from Windows 2000.

Before you install the software, make sure you do the following:

• Connect the machine to your computer. (See the Basic Guide.)

• Turn on the machine. (See the Basic Guide.)

• If any Windows application is running on your computer, quit it.

IMPORTANT

•

If your computer has no printer driver installed through a USB connection, follow the steps in “Installing Printer Driver through a USB

Connection,” on p. 2-2 first, then continue this procedure.

•

If Plug and Play is automatically carried out and the [Found New Hardware Wizard] dialog box appears, click [Cancel] to follow the

procedure below.

•

If the machine has no power supplied when the installation starts, the installation may not complete successfully.

•

If you are using Windows 2000/XP, be sure to log on as a member of Administrators. The full control access right for the printer is

necessary for the installation of CARPS.

Place the CD-ROM into your CD-ROM drive.

The CD-ROM menu is displayed.

NOTE

If the LASER CLASS 310 CD-ROM Setup screen is not displayed, double-click [My Computer] on the Windows desktop. Open the

CD-ROM icon, then double-click [MInst (Minst.exe)].

Click [Easy Installation] or [Custom Installaion].

NOTE

When you select [Easy Installation], Printer Driver and Online Manuals will be installed. If you do not want to install both items, select

[Custom Installation], and select the item you want to install.