Getting Started ENGLISH CEL-SV6YA210
Package Contents Before use, make sure the following items are included in the package. If anything is missing, contact your camera retailer. Camera Battery Pack NB-11LH/NB-11L Battery Charger CB-2LFE Wrist Strap* * For attachment instructions, refer to the Camera User Guide that can be downloaded from the Canon website. • Printed matter is also included. • A memory card is not included. Compatible Memory Cards No memory card is included. Purchase one of the following kinds of card as needed.
Manuals and Software You can download manuals and software from the following URL. http://www.canon.com/icpd/ • With a computer connected to the Internet, access the above URL. • Access the site for your country or region. • Adobe Reader is required to view the manuals. • You can also download software from the website. For instructions on downloading and installing the software, refer to the Camera User Guide available for download.
Initial Preparations Inserting the Battery Pack and Memory Card 1 Open the cover. Slide the cover ( ) and open it ( ). 2 Insert the battery pack. While pressing the battery lock in the direction of the arrow, insert the battery pack as shown and push it in until it clicks into the locked position. To remove the battery pack, press the battery lock in the direction of the arrow. Terminals Battery Lock 3 Check the card’s write-protect tab and insert the memory card.
Initial Preparations Setting the Date and Time 1 Turn the camera on. Press the ON/OFF button. The [Date/Time] screen is displayed. 2 Set the date and time. Press the buttons to choose an option. Press the buttons to specify the date and time. When finished, press the button. 3 Set the home time zone. Press the buttons to choose your home time zone. Press the button when finished. After a confirmation message, the setting screen is no longer displayed.
Initial Preparations Changing the Date and Time To adjust the date and time once you have set it, do the following. 1 Press the button. 2 Move the zoom lever to choose the [3] tab. 3 Press the buttons to choose [Date/Time], and then press the button. 4 Follow step 2 in “Setting the Date and Time” to adjust the settings. 5 Press the button. Display Language Change the display language as needed. 1 Enter Playback mode. Press the <1> button. 2 Access the setting screen.
Trying the Camera Out Shooting For fully automatic selection of the optimal settings for specific scenes, simply let the camera determine the subject and shooting conditions. 1 Turn the camera on and enter [ ] mode. Press the ON/OFF button. Press the button several times until [ ] is displayed. 2 Compose the shot. To zoom in and enlarge the subject, move the zoom lever toward (telephoto) as you watch the screen, and to zoom away from the subject, move it toward (wide angle).
Trying the Camera Out Viewing 1 Enter Playback mode. Press the <1> button. 2 Browse through your images. To view the previous or next image, press the buttons. Movies are identified by a [ ] icon. To play movies, go to step 3. 3 Play movies. Press the button, press the buttons to choose [ ], and then press the button again. Playback now begins, and after the movie ] is displayed. is finished, [ To adjust the volume, press the buttons.
CANON EUROPA N.V. Bovenkerkerweg 59, 1185 XB Amstelveen, The Netherlands CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan © CANON INC.
