User`s guide

1 Introduction
D60707-16 5
1 Introduction
1.1 SafeCom Go Canon
SafeCom Go Canon is the internal solution for Canon MFPs. It integrates with
the touch-screen control panel of the Canon MFP and offers user authentication
by code and/or card.
SafeCom Go Canon works together with the SafeCom G3 Server software and is
designed to help companies and organizations gain control over their printing
costs and document security. The SafeCom solution can be enhanced with add-
on modules to build customer specific and scalable solutions.
1.2 Requirements
 SafeCom Go Canon supports the MEAP-enabled Canon MFPs in Table 1.
The MFPs are listed in order of release with the latest at the bottom.
 Built-in USB port for connection of USB ID Device is featured on all newer
MFPs. Older MFPs may require a Canon USB Application Interface Board
(type B1, D1 or G1) and/or any additional Canon hardware.
 MFP must be connected to the network.
 The MFP should set department ID as off.
 The MFP should not have system administrator setting.
 SafeCom device license and Canon MEAP License (royalty fee paid to
Canon).
 Canon Access Management System Kit-A2 (AMS) is required to control
user's access rights for: Copy, Copy in color, E-mail, Scan and Fax.