User`s guide

3 Using SafeCom Go Canon
D60707-16 35
3.6 Logout
There is a configurable Timeout (2.8.9) that defaults to 60 seconds. A user is
automatically logged out if no buttons are tapped during that time. To logout
actively:
 Tap Logout in the Document list dialog.
 Press the ID button.
 Use card again (if a card reader is connected and you logged in by card).
Note: If Coping is done the Logging out message is displayed until the MFP is
in idle state. This is required to allow correct reading of the MFP’s copy page
counters.