User`s guide

2 SafeCom Go Canon
D60707-16 27
2.8.10 Restore factory default
1. Open the Configuration web page (2.7.3).
2. Click Restore.
2.8.11 Determine the version
The version of the SafeCom Go Canon software can be determined from the
Information web page.
1. Open the Information web page (2.7.2).
The version can also be seen in the Device properties dialog in SafeCom
Administrator.
2.8.12 Select SafeCom Go login as login service
1. Open a web browser and enter the IP address of the MFP in the address
field followed by :8000/sms. Example:
http://172.16.6.55:8000/sms
Use of JavaScript (Active Scripting) must be enabled in the browser.
2. Enter Password. The default SMS password is: MeapSmsLogin.
3. Click Log In.
4. In the browser click on the System Management tab.
5. Click on the Enhanced Sys. App tab.
6. In the Login Service section select SafeCom Go Login.
7. On the control panel press and hold the power button to restart the MFP.
2.8.13 Update the version
If you are updating from a previous version to S88 010.010*03 you need to
uninstall the previous SafeCom Go Canon version first. This is because the
product now has a new ID.
1. Uninstall SafeCom Go Canon (2.9)
2. Install the new SafeCom Go Canon (2.4).