User`s guide

2 SafeCom Go Canon
D60707-16 26
2.8.8 Define System Manager
1. Open a web browser and enter the IP address of the MFP in the address
field followed by :8000. Example:
http://172.16.6.55:8000
Use of JavaScript (Active Scripting) must be enabled in the browser.
2. Click Settings/Registration.
3. Click User management.
4. Click System Manager/Contact Person Information Settings.
5. Check Set ID and PIN.
6. Enter System Manager ID.
7. Enter System PIN and repeat the entered PIN in the Confirm field.
8. Click OK.
9. The Log In web page appears. If SafeCom Go is installed, the web page is
provided by SafeCom. See also: 2.7.1.
2.8.9 Configure the timeout
The user is automatically logged out according to the printer’s Auto Reset
Time (or Auto Clear Time on older models).
1. Open a web browser and enter the IP address of the MFP in the address
field followed by :8000. Example:
http://172.16.6.55:8000
Use of JavaScript (Active Scripting) must be enabled in the browser.
2. Click Settings/Registration.
3. Click Timer/Energy Settings.
4. Change the Auto Reset Time and click OK.
On older models:
1. Open a web browser and enter the IP address of the MFP in the address
field followed by :8000. Example:
http://172.16.6.55:8000
Use of JavaScript (Active Scripting) must be enabled in the browser.
2. Click Add. Func.
3. Click Custom Settings.
4. Click Timer Settings.
5. Change the Auto Clear Time and click OK.