User`s guide

2 SafeCom Go Canon
D60707-16 20
 Post track: Check to allow the tracking record for a Pull Print job to be
adjusted to reflect the actual number of pages printed and also the
number of these pages that were in color. The price of the job is also
adjusted.
 Copy track, Email track and Fax track: This is available on devices
without Canon Access Management System Kit-A2 (AMS).
o Copy track - check in order to track copies.
o E-mail track - check to track E-mail jobs submitted with the MFP’s
Scan and Send function.
o Fax track - Check to track Fax jobs.
 MFP authentication: This is available on devices with Canon Access
Management System Kit-A2 (AMS). You can choose if users are required to
login before they can:
o Pull Print – collect documents at any device.
o Copy - make hardcopies of scanned documents. The ability to
control access to copy in color can be controlled per user in the
SafeCom Administrator and requires SafeCom G3 version S82
070.440*01 or higher.
o E-mail - send scanned documents as attachments to e-mail.
 High speed print: Check to allow faster printing. With high speed print
the print speed becomes comparable to that of printing the document
directly to the device.
 Timeout: Since version S88 010.020*02 the user is automatically logged
out according to the printer’s Auto Reset Time (on older models a.k.a.
Auto Clear Time). Please refer to 2.8.9.
 Encryption: This section is only relevant for SafeCom G3 version S82
070.400*01 or higher. Leave asymmetric encryption (RSA, 512-bit, 1024-
bit and 2048-bit) and the symmetric encryption (AES / TwoFish, 128-bit
and 256-bit) at Default and the device will try to honor the encryption
method and size that has been specified on the server while at the same
time taking the processing power and memory of the device into
consideration.
 Restore: Click to set all settings to their default value.