User Guide
Table Of Contents
- Service Manual
- Contents
- Chapter 1 Specifications
- Chapter 2 Functions
- Chapter 3 Parts Replacement Procedure
- 3.1 External Covers
- 3.2 Drive System
- 3.2.1 Stapler
- 3.2.2 Swing Unit
- 3.2.2.1 Removing the Front Cover
- 3.2.2.2 Removing the Rear Cover
- 3.2.2.3 Removing the Left Upper Cover
- 3.2.2.4 Removing the Grate- shaped Upper Guide
- 3.2.2.5 Removing the Tray 1
- 3.2.2.6 Removing the Tray 2
- 3.2.2.7 Removing the Grate- shaped Lower Guide
- 3.2.2.8 Removing the Processing Tray
- 3.2.2.9 Removing the Swing Unit
- 3.3 Document Feeding System
- 3.3.1 Process Tray Assembly
- 3.3.2 Tray 1
- 3.3.3 Tray 2
- 3.3.4 Buffer Roller
- 3.3.5 Return Roller
- 3.3.5.1 Removing the Front Cover
- 3.3.5.2 Removing the Rear Cover
- 3.3.5.3 Removing the Left Upper Cover
- 3.3.5.4 Removing the Grate- shaped Upper Guide
- 3.3.5.5 Removing the Tray 1
- 3.3.5.6 Removing the Tray 2
- 3.3.5.7 Removing the Grate- shaped Lower Guide
- 3.3.5.8 Removing the Processing Tray
- 3.3.5.9 Removing the Return Roller
- 3.3.6 Return Roller Unit
- 3.3.6.1 Removing the Front Cover
- 3.3.6.2 Removing the Rear Cover
- 3.3.6.3 Removing the Left Upper Cover
- 3.3.6.4 Removing the Grate- shaped Upper Guide
- 3.3.6.5 Removing the Tray 1
- 3.3.6.6 Removing the Tray 2
- 3.3.6.7 Removing the Grate- shaped Lower Guide
- 3.3.6.8 Removing the Stapler
- 3.3.6.9 Removing the Processing Tray
- 3.3.6.10 Removing the Swing Unit
- 3.3.6.11 Removing the Return Roller Unit
- 3.4 Electrical System
- 3.4.1 Finisher Controller PCB
- 3.4.2 Static Charge Eliminator 1
- 3.4.2.1 Removing the Front Cover
- 3.4.2.2 Removing the Rear Cover
- 3.4.2.3 Removing the Left Upper Cover
- 3.4.2.4 Removing the Grate- shaped Upper Guide
- 3.4.2.5 Removing the Tray 1
- 3.4.2.6 Removing the Tray 2
- 3.4.2.7 Removing the Grate- shaped Lower Guide
- 3.4.2.8 Removing the Stapler
- 3.4.2.9 Removing the Processing Tray
- 3.4.2.10 Removing the Swing Unit Static Charge Eliminator
- 3.4.3 Static Charge Eliminator 2
- Chapter 4 Maintenance
- 4.1 User Maintenance
- 4.2 Maintenance and Inspection
- 4.3 Adjustment
- 4.4 Troubleshooting
- 4.4.1 Error Code
- 4.4.1.1 E500;Communication error
- 4.4.1.2 E505;Backup RAM error
- 4.4.1.3 E514;Rear end assist motor error
- 4.4.1.4 E519;Gear change motor error
- 4.4.1.5 E530;Front aligning plate motor error
- 4.4.1.6 E531;Staple motor error
- 4.4.1.7 E532;Stapler shift motor error
- 4.4.1.8 E535;Swing motor error
- 4.4.1.9 E537;Rear aligning plate motor error
- 4.4.1.10 E540;Tray 1 shift motor error
- 4.4.1.11 E542;Tray 2 shift motor error
- 4.4.1.12 E584;Shutter malfunction
- 4.4.1 Error Code
- 4.5 Outline of Electrical Components
- 4.6 Variable Resistors (VR), Light-Emitting Diodes (LED), and Check Pins by PCB
- 4.7 Upgrading
- 4.8 Service Tools
- Chapter 5 Error Code
Chapter 3
3-37
F-3-135
3.3.6.2 Removing the Rear
Cover 0004-4656
1) Remove three screws [1] and remove the rear cover
[2].
F-3-136
3.3.6.3 Removing the Left
Upper Cover 0004-4659
1) Remove two screws [1].
2) With the upper door [2] open, remove the left upper
cover [3] by tilting to the right.
F-3-137
When replacing, hook the two claws [1] of the left
upper cover to the steel plate.
F-3-138
3.3.6.4 Removing the Grate-
shaped Upper Guide 0004-4661
1) Lower tray [1] below the grate-shaped upper guide
[2] (For how the tray is moved, see the steps under
"Removing the Tray 1.").
2) Remove five screws [3] and remove the grate-
shaped upper guide [2].
[1]
[2]
[3]
[2]
[1]