User guide

7
Sample Set
When making multiple copies, the machine copies only one set to be checked before completing the copying job. Sample
set button will only appear when 2 or more copies are requested, and the document is placed in the document feeder.
1. Place originals in document feeder.
2. Enter the desired number of copies.
3. Press the Sample Set button.
4. Set copy settings i.e. 2 sided copying.
5. Press the Start button. The machine will stop after printing the first set.
6. If the settings are correct, press the Start Print button, to complete the copy job.
7. If the settings are incorrect, press the Change Settings button and change copier settings to copy the job with
new settings.
Reservation Job
Up to 5 reservation jobs can be scanned into memory while the machine is copying the first job. The next copy job will
automatically begin when the current job is completed.
1. Set the first copy job as normal, and press the Start button.
2. Once all the originals are scanned into memory, press the Done button. The machine is now available for the next job
to be scanned.
3. Reset the machine (yellow button), and set the next copy job.
4. Repeat steps 2-3 the set the next job.
Finisher … Collate/Group/Staple/Hole Punch
Copy sets are collated in various ways depending on the machine configuration (optional accessories).
1. Place originals in document feeder.
2. Press the Finisher button.
3. Select the desired option - Collate/Group/Staple.
4. Press the OK button.
5. Enter the desired number copies, and press the Start button.
Note: Your machine may not offer all the following options.
If the Collate mode is set
If the Group mode is set