Specifications

Basic Operations

Platen Glass 3-23

Platen Glass

You should use the platen glass when copying bound originals (such as books and

magazines),heavy or lightweight originals, and transparencies. You should also place originals onto

the platen glass when you want to copy an A3 original with an image that extends all the way to the

edges without the periphery of the original being cut off. (See the Copying and Mail Box Guide and

the Sending and Facsimile Guide.)

Remark

The machine automatically detects the size of the

following originals: A3, A4, and A4R.

1. Lift the feeder/plate n cover.

This machine is equipped with an open/close sensor on the feeder/platen cover (see circled area in the

above illustration). When placing originals on the platen glass, lift the feeder/platen cover approximately

300 mm so that the sensor detaches from the feeder/platen cover. If the sensor does not detach from the

feeder/platen cover, the size of the originals may not be detected correctly.

2. Plac e your originals face down.

Acesst 1.0 6251194